PERANCANGAN ULANG TATA LETAK FASILITAS PRODUKSI UMKM ABC MENGGUNAKAN METODE SYSTEMATIC LAYOUT PLANNING
Abstract
Tata letak fasilitas berperan penting dalam kelancaran alur produksi dan efisiensi perpindahan material. UMKM Kerupuk Cabe masih memiliki tata letak yang belum optimal yaitu sebesar 440,8 meter, sehingga menyebabkan jarak perpindahan material cukup panjang dan alur produksi kurang efisien. Penelitian ini bertujuan untuk merancang ulang tata letak fasilitas serta membandingkan metode Systematic Layout Planning (SLP) yang meliputi analisis aliran produksi, From-To Chart (FTC), Activity Relationship Chart (ARC), Activity Relationship Diagram (ARD), dan metode Grafik. Hasil penelitian menunjukkan bahwa jarak perpindahan awal sebesar 440,8 meter, sementara metode SLP menghasilkan jarak sebesar 240,6 meter, dan metode grafik menghasilkan jarak sebesar 306,4 meter. Sehingga metode SLP menjadi alternatif tata letak terbaik untuk meningkatkan efisiensi alur produksi dan pemanfaatan ruang pada UMKM Kerupuk Cabe.
Full Text:
PDFReferences
Aini, N., Hidayat, K., & Firmansyah, R. A. (2025). Analisis Peta Proses Operasi Permen Cabe Jamu. Prosiding Seminar Nasional Pembangunan Dan Pendidikan Vokasi Pertanian, 6(1), 150–156. https://doi.org/https://doi.org/10.47687/snppvp.v6i1.1764
Alfiyad, F., Situmorang, J., & Aditya, R. (2025). Perencanaan Ulang Tata Letak Fasilitas IKM Peternakan Ayam Broiler Menggunakan Metode Systematic Layout Planning dan Grafik. 31–42. https://doi.org/10.33364/kalibrasi/v.23-2.2666
Alparadi, B., Fitra, Syahputra, T. M. H., & Pangihutan, A. (2026). Rancangan Ulang Tata Letak IKM Buska Indah Menggunakan Metode SLP dan Grafik. Industrika: Jurnal Ilmiah Teknik Industri, 10(1), 65–77. https://doi.org/https://doi.org/10.37090/2f0mrm56
Azizi, A. F., Fitra, Wicaksono, D. C., & Agel, R. (2026). Perbaikan Ulang Tata Letak IKM CV Cahaya Tekhnik Abadi Jasa Permesinan. Industrika: Jurnal Ilmiah Teknik Industri, 10(1), 1–11. https://doi.org/https://doi.org/10.37090/8ggwmp20
Chairina, B., Alfian, W., & Prabowo, A. (2025). Rancangan Ulang Tata Letak Industri Mikro Kecil Menengah Tenun Songket Melayu Riau Wan Syamsinar Grafik. Journal Balitbangda Lampung, 13(2), 1–14. https://doi.org/https://doi.org/10.35450/jip.v13i2.1184
Ferdiansyah, Fitra, Rohman, H., & N.A, M. F. (2025). Perbaikan Tata Letak Ikm Vulkanisir Ban Gunung Timur di Kota Dumai. Jurnal Mitra Teknik Industri, 4(3), 241–251. https://doi.org/https://doi.org/10.24912/jmti.v4i3.36313
Fitra, Faisal, I., Ramadhan, M. R., & Setiawan, W. A. (2025). Perbaikan Ulang Tata Letak IKM Dianeka Furniture di Kota Dumai. Jurnal Mitra Teknik Industri, 4(3), 272–281. https://doi.org/https://doi.org/10.24912/jmti.v4i3.36314
Gao, G., Feng, Y., Zhang, Z., Wang, S., & Yang, Z. (2022). Integrating SLP with simulation to design and evaluate facility layout for industrial head lettuce production. Annals of Operations Research, 321, 209–240. https://doi.org/10.1007/s10479-022-04893-z
Julianti, D., Fitra, Haikal, M., & Sitinjak, R. U. (2025). Facility Layout Redesign for an SME Printing Industry Using Systematic Layout Planning : A Case Study in Dumai. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 11(2), 187–199. https://ejournal.uin-suska.ac.id/index.php/jti/article/view/38058
Lai, W., Fu, Y., Li, R., & Lin, J. (2020). Optimum Design of Construction Site Layout Based on SLP Method and Genetic Algorithm. International Conference on Construction and Real Estate Management. https://ascelibrary.org/doi/10.1061/9780784483237.009
Li, H., Wang, Y., Fan, F., Yu, H., & Chu, J. (2021). Sustainable Plant Layout Design for End of Life Vehicle Recycling and Disassembly Industry Based on SLP Method , a Typical Case in China. 9, 81913–81925. https://doi.org/10.1109/ACCESS.2021.3086402
Li, Y. (2020). Research On Layout Planning Of Disinfection Tableware Distribution Center Based On SLP Method. MATEC Web of Conferences, 325(4). https://doi.org/https://doi.org/10.1051/matecconf/202032503004
Mahanum. (2021). Tinjauan Kepustakaan. Journal Of Education, 1(2), 1–12. https://doi.org/https://doi.org/10.52121/alacrity.v1i2.20
Mendoza-Ortega, G. P., Angelica, T.-E., Jaraba-Amaya, A. L., & Mejía-Gaspar, D. M. (2025). Strategic Plant Redesign in the Glass Industry : A Case Study Applying SLP and Discrete Simulation. Applied Sciences, 15(13), 1–22. https://doi.org/https://doi.org/10.3390/app15137028
Mesra, T., Melliana, Fitra, & Saputra, R. F. (2021). Perancangan Perbaikan Tata Letak Laboratorium PT Surveyor Indonesia Unit Dumai. Journal of Industrial and Manufacture Engineering, 5(1), 49–54. https://doi.org/10.31289/jime.v5i1.4979
Muhammad, F., Fitra, Rahman, R., & Sipayung, D. R. (2025). Optimasi Tata Letak Produksi IMKM Reklin dengan Metode SLP dan Grafik. Jurnal Kalibrasi, 20–30. https://doi.org/10.33364/kalibrasi/v.23-2.2730
Prasetyo, D. D., Fitra, Belen, M., & Simanjuntak, F. R. (2025). Rancangan Ulang Tata Letak Industri Kecil dan Menengah Tikar Pandan Medang Kampai Kota Dumai Menggunakan Metode Systematic Layout Planning dan Grafik. INOVASI PEMBANGUNAN – JURNAL KELITBANGAN, 13(3), 1–13. https://doi.org/https://doi.org/10.35450/jip.v13i03.1191
Prayoga, W., Fitra, Pratama, R. J. P., & Sariantika, R. (2025). Facility Layout Redesign for Tire Vulcanization SMEs Using Systemic Layout Planning and Graphical Methods. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 11(2), 241–253. https://doi.org/https://doi.org/10.55826/ef2nma03
Rahmawanti, G., Fitra, Mellisa, F., & Putri, Y. (2026). Perbaikan Tata Letak IMKM Bengkel Las Jaya di Kota Dumai Menggunakan Metode Systematic Layout Planning ( SLP ) dan Grafik. Jurnal Industri, Manajemen Dan Rekayasa Sistem, 4(2), 162–175. https://doi.org/https://doi.org/10.56211/factory.v4i2.1215
Randes, D., Fitra, Irmayani, & Febrina, W. (2022). Perancangan Perbaikan Tata Letak Pengetaman Kayu UD Indah Karya. Jurnal ARTI: Aplikasi Rancangan Teknik Industri, 17(1), 57–68. https://doi.org/https://doi.org/10.52072/arti.v17i1.356
Rifa’i, A., Fitra, Amalia, W., & Rama, Y. D. (2025). Perbaikan Tata Letak Industri Kecil Menengah ( IKM ) Menggunakan Metode Systematic Layout Planning ( SLP dan Metode Grafik ). 4(4), 1358–1369.
Rozaq, F., Saktiawan, A., & Prawira, R. (2025). Facility Layout Redesign of Goat Leather Kompang SME in Dumai Using Systemic Layout Planning dan Graph Method. 11(2), 254–266.
Santoso, & Heryanto, R. M. (2020). Perancangan Tata Letak Fasilitas.
Shaputra, F., Hashifah, F., & Khalish, M. Z. (2025). Re- Layout Tata Letak Fasilitas Industri Kecil Menengah Iwan Batako Menggunakan Metode Systematic Layout Planning dan Grafik. Jurnal Teknologi Dan Manajemen Industri Terapan, 4(4), 1347–1357. https://doi.org/https://doi.org/10.55826/ef2nma03
Siburian, C., Fitra, Gunawan, A., & Nugraha, B. A. (2025). Perbaikan Tata Letak Industri Mikro Kecil Menengah Bengkel Las Karya Muda Sentosa Menggunakan Metode Systematic Layout Planinng dan Grafik. Blend Sains Jurnal Teknik. https://doi.org/https://doi.org/10.56211/blendsains.v4i2.1178
Solís, C.-, Jesús, E., & Cesar, J. (2022). Technical feasibility for a service company through the systematic planning method for plant distribution (SLP). Journal Industrial Organization, 6(11), 34–43. https://doi.org/10.35429/JIO.2022.11.6.34.43
Xu, X. (2020). SLP-based Technical Plant Layout Planning and Simulation Analysis. IOP Conference Series: Materials Science and Engineering, 772. https://doi.org/10.1088/1757-899X/772/1/012020
Zhang, B., & Wang, X. (2020). Modelling and Simulation of Facility Planning Problem Based on Improved SLP Method. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899X/806/1/012034
Zhao, Y., Wu, Y., Zhao, M., Xiang, Z., Zhi, J., & Xu, B. (2023). Design and Evaluation of the Internal Space Layout of High-Speed Health Trains Based on Improved Systematic Layout Planning. Multidisciplinary Scientific Journal, 6(3), 361–383. https://doi.org/https://doi.org/10.3390/j6030025
Zúñiga, E. R., Moris, M. U., Syberfeldt, A., Fathi, M., & Rubio-romero, J. C. (2020). A Simulation-Based Optimization Methodology for Facility Layout Design in Manufacturing. IEEE, 8, 163818–163828. https://doi.org/10.1109/ACCESS.2020.3021753
DOI: https://doi.org/10.37905/jirev.v6i1.38746
Refbacks
- There are currently no refbacks.
Copyright (c) 2026 Fitra Fitra, Della Puspita, Gracesiya Gracesiya, Novita Sari, Siti Najwa Syuhada
This work is licensed under a Creative Commons Attribution 4.0 International License.
Total pengunjung = View My Stats
