Edukasi Pemurnian Logam Tembaga melalui Elektrolisis untuk Siswa SMA Terpadu Wira Bhakti Gorontalo

Kostiawan Sukamto, Astin Lukum, Akram La Kilo, Wiwin Rewini Kunusa

Abstract


This community service activity aims to provide students at SMA Terpadu Wira Bhakti Gorontalo with an understanding of the copper purification process through electrolysis and the application of environmentally friendly technology in the metallurgy industry. The activity was carried out using a combined approach of theoretical instruction and direct laboratory practicum. Students learned the basic principles of electrolysis, the mechanism of copper purification, and how this technology reduces environmental impact compared to traditional methods. During the practicum, students had the opportunity to apply the theory they had learned, observe the electrolysis process, and understand the results of copper purification. The evaluation results indicate that the activity was effective in enhancing students' understanding of electrolysis and the importance of sustainable technology in the industry. Additionally, the activity successfully sparked students' interest in the field of engineering and environmentally friendly industries.

Full Text:

PDF

References


Amri, I., Awalsya, F., & Irdoni, I. (2020). Pengolahan limbah cair industri pelapisan logam dengan proses elektrokoagulasi secara kontinyu. Chempublish Journal, 5(1), 15–26. https://doi.org/10.22437/CHP.V5I1.7650

Budiyanto, E., & Yuono, L. D. (2018). Peranan Aerasi Sel Elektrolisis Dalam Pembentukan Pori Pada Proses Anodizing Logam Aluminium. Turbo: Jurnal Program Studi Teknik Mesin, 7(2). https://doi.org/10.24127/TRB.V7I2.811

Choirunnisa, S. A., Suad, S., & Sumaji, S. (2024). The Difference and Effectiveness of the Discovery Learning and Direct Learning Model on the Science Learning Outcomes. ASEANA Science and Education Journal, 4(1), 16–20. https://doi.org/10.53797/ASEANA.V4I1.3.2024

Daffa Zulfany, M., Manggala, A., Pratiwi, I., Energi, T., Politeknik, T., & Sriwijaya, N. (2024). Produksi Gas Hidrogen Dengan Proses Elektrolisis Air Laut Ditinjau Dari Konsentrasi KOH. Jurnal Redoks, 9(2), 105–113. https://doi.org/10.31851/REDOKS.V9I2.15012

Diallo, M. S., Kotte, M. R., & Cho, M. (2015). Mining Critical Metals and Elements from Seawater: Opportunities and Challenges. Environmental Science &Amp; Technology, 49(16), 9390–9399. https://doi.org/10.1021/ACS.EST.5B00463

Hermayanti, S., Widodo, D. S., & Hastuti, R. (2011). Pengaruh Ligan NH3 pada Pengambilan Logam Tembaga dari Serpihan Sisa Produksi Kuningan Kabupaten Pati Secara Elektrolisis. Jurnal Kimia Sains Dan Aplikasi, 14(2), 54–57. https://doi.org/10.14710/JKSA.14.2.54-57

Liakyn, L., Mamyachenkov, S., Onalbayeva, Zh. S., Анисимова, О. С., & Daumova, G. (2024). Purification of Complex Solution of Zinc Sulfate from Copper Ions by Electrocementation Method. Trudy Universiteta, 3(96). https://doi.org/10.52209/1609-1825_2024_3_47

Napitupulu, N., & Karti, K. (2024). Analysis of DC Voltage and Current on the Busbar to the Anode and Cathode Plates in the Electrolysis Process at the Chemical Plant Unit of PT. Toba Pulp Lestari, Tbk. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA), 3(1), 72–77. https://doi.org/10.56862/IRAJTMA.V3I1.92

Park, E., Kim, M., Pin, M. W., Park, H., & Kim, Y. H. (2023). Precious Metal Recovery from Waste Electrical and Electronic Equipment through Oxidative Refining. Recycling, 8(5). https://doi.org/10.3390/RECYCLING8050080

Rudibyani, R. B. (2019). Peningkatkan Keterampilan Berpikir Elaborasi dan Penguasaan Konsep Elektrolisis Siswa Melalui Discovery Learning. Jurnal Sains Dan Edukasi Sains, 2(2), 60–69. https://doi.org/10.24246/JUSES.V2I2P60-69

Rudnicki, S. A. (2010). Prevention and Treatment of Peripheral Neuropathy after Bariatric Surgery. Current Treatment Options in Neurology, 12(1), 29–36. https://doi.org/10.1007/S11940-009-0052-2

Suwardi, S., Lidiawati, L., & Haidul, H. (2024). Reduksi Kadar Tembaga (Cu) pada Limbah Cair Proses Etching PCB di Laboratorium Fisika Menggunakan Metode Elektrolisis. Jurnal Pengelolaan Laboratorium Pendidikan, 7(1), 32–40. https://doi.org/10.14710/JPLP.7.1.32-40

Ulum, B., Kurniawan, F., & Ulfin, I. (2019). Sintesis Senyawaan Seng Secara Elektrolisis. Jurnal Sains Dan Seni ITS, 7(2). https://doi.org/10.12962/J23373520.V7I2.29581

Wang, D., Hu, S., Kremenakova, D., & Militky, J. (2022). The electromagnetic shielding effectiveness of the copper plated nonwoven fabric and its’ related comfort properties. Journal of Engineered Fibers and Fabrics, 17. https://doi.org/10.1177/15589250221133462

Wattimena, R. M. (2013). Analisa Pembuatan Serbuk Tembaga Hasil Proses Electrorefining Metode Laboratorium. https://doi.org/10.32497/RM.V8I1.393

Wiyanto, E., Harsono, B., Makmur, A., Pangputra, R., Julita, J., & Kurniawan, M. S. (2017). Penerapan Elektrokoagulasi Dalam Proses Penjernihan Limbah Cair. Jetri : Jurnal Ilmiah Teknik Elektro. https://doi.org/10.25105/JETRI.V12I1.1449




DOI: https://doi.org/10.37905/damhil.v4i1.33074

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2025 Kostiawan Sukamto, Astin Lukum, Akram La Kilo, Wiwin Rewini Kunusa

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.