Identifikasi Tingkat Kesegaran Ikan Tuna Menggunakan Metode GLCM dan KNN

Zulfrianto Yusrin Lamasigi, Serwin -, Husdi -, Yulianti Lasena

Abstract


Abstrak-Dari potensi perikanan dan kelautan secara Nasional, Provinsi Gorontalo memiliki  potensi perikanan dan kelautan cukup besar yang dapat dikelola  untuk  menunjang pembangunan Gorontalo. Potensi perikanan tangkap Provinsi Gorontalo tidak bisa dipisahkan dari potensi perikanan tangkap yang  berbasis  pada  WPP  (Wilayah Pengelolaan  dan Pemanfaatan)  dan diakui  secara Nasional maupun Internasional. Provinsi Gorontalo merupakan salah satu provinsi penghasil ikan tuna di Indonesia, hasil tangkapan ikan tuna di gorontalo telah diekspor keberbagai negara. Tuna merupakan salah satu komoditi andalan perikanan di Gorontalo yang juga banyak melibatkan nelayan kecil. Penelitianini bertujuan untuk melakukan identifikasi tingkat kesegaran ikan tuna dengan menggukanan metode Gray LevelCo-Occurrence Matrix(GLCM)sebagai metode ektraksi fitur dan K-Nearest Neighbour (K-NN) digunakan sebagai metode klasifikasi. Padapenelitian ini, akan dilakukan 5 kali percobaan berdasarkan sudut 0°, 45°, 90°, 135° dan 180° pada nilai k=1, 3, 5, dan 7. Sementara itu, untuk menghitung tingkat akurasi dari klasifikasi K-NN akan menggunakan confusion matrix. Dari uji coba yang di lakukan dengan menggunakan jumlah data training sebanyak 130 citra dan data testing 45 citra pada semua kelas dan sudut mendapatkan hasil akurasi tertinggi pada sudut 0° dengan nilai k=1 yaitu sebesar 82,28% dan yang paling rendah ada pada sudut 135° dan 180° dengan nilai k=1 yaitu sebesar 53,71%. Berdasarkan hasil akurasi yang didapatkan menunjukkan bahwah GLCM bekerja dengan baik untuk meningkatkan hasil akurasi klasifikasi K-NN yang dibuktikan dengan hasil rata-rata akurasi yang diperoleh mencapai 50%.

Abstract-From the national fisheries and marine potential, Gorontalo Province has a large enough fishery and marine potential that can be managed to support the development of Gorontalo. The capture fisheries potential of Gorontalo Province cannot be separated from the potential of capture fisheries based on the WPP (Management and Utilization Area) and is recognized both nationally and internationally. Gorontalo province is one of the tuna-producing provinces in Indonesia, tuna catches in Gorontalo have been exported to various countries. Tuna is one of the mainstay fisheries commodities in Gorontalo which also involves many small fishermen. This study aims to identify the freshness level of tuna by using the Gray Level Co-Occurrence Matrix (GLCM) method as a feature extraction method and K-Nearest Neighbor (K-NN) is a classification method. In this experiment, 5 experiments were conducted based on the angles of 0°, 45°, 90°, 135° and 180° at the values of k=1, 3, 5, and 7. Meanwhile, to calculate the accuracy level of the K-NN classification, we will use a confusion matrix. From the trials carried out using the amount of training data as many as 130 images and testing data 45 images against all classes based on angles 0°, 45°, 90°, 135°, and 180° at the values of k=1, 3, 5, and 7, the highest accuracy obtained is at an angle of 0° with a value of k=1 which is 82.28% and the lowest is at an angle of 135° and 180° with a value of k=1 which is 53.71%. The results of the trials conducted show that GLCM works well to improve the accuracy of the K-NN classification as evidenced by the average accuracy of 50%.


Keywords


Identifikasi; GLCM; K-Nearest Neighbor; Confusion Matrix

Full Text:

PDF

References


P. Gorontalo, “Pemerintah Provinsi Gorontalo, “Rencana Strategis (Renstra) Dinas Kelautan dan perikanan provinsi gorontalo,” https://dinaskp.gorontaloprov.go.id., 2017. https://dinaskp.gorontaloprov.go.id.

M. R. Gobel, M. Baruwadi, and A. Rauf, “Analisis Daya Saing Ikan Tuna Di Provinsi Gorontalo,” Jambura Agribus. J., vol. 1, no. 1, pp. 36–42, 2019, doi: 10.37046/jaj.v1i1.2448.

Z. Y. Lamasigi, “DCT Untuk Ekstraksi Fitur Berbasis GLCM Pada Identifikasi Batik Menggunakan K-NN,” Jambura J. Electr. Electron. Eng., vol. 3, no. 1, pp. 1–6, 2021, doi: 10.37905/jjeee.v3i1.7113.

H. Hsv and F. Astutik, “Sistem Pengenalan Kualitas Ikan Gurame Dengan Wavelet, Pca, Histogram Hsv Dan Knn,” Lontar Komput., vol. 4, no. 3, pp. 336–346, 2015, doi: 10.24843/LKJITI.

N. W. Roberto, “Penerapan Metode K-Nearest Neighbor dalam Identifikasi Kesegaran Ikan,” 2019.

H. Wijayanto, “Klasifikasi Batik Menggunakan Metode K-Nearest Neighbour Berdasarkan Gray Level Co-Occurrence Matrices ( GLCM ),” Jur. Tek. Inform. FIK UDINUS, no. 5, 2014.

A. A. Kasim and A. Harjoko, “Klasifikasi Citra Batik Menggunakan Jaringan Syaraf Tiruan Berdasarkan Gray Level Co- Occurrence Matrices ( GLCM ),” Semin. Nas. Apl. Teknol. Inf. Yogyakarta, 21 Juni 2014, pp. 7–13, 2014.

Y. Fernando, “Klasifikasi Jenis Daging Berdasarkan Analisis Citra Tekstur Gray Level Co-Occurrence Matrices ( Glcm ) Dan Warna,” Semin. Nas. Sains dan Teknol. 2017, no. Fakultas Teknik Universitas Muhammadiyah Jakarta, pp. 1–7, 2017.

R. A. Surya, A. Fadlil, and A. Yudhana, “Ekstraksi Ciri Citra Batik Berdasarkan Tekstur Menggunakan Metode Gray Level Co Occurrence Matrix,” Prosiding, 6 Desember 2016, Vol 2 No. 1, vol. 2, no. 1, pp. 146–150, 2016.

Z. Y. Lamasigi, M. Hasan, and Y. Lasena, “Local Binary Pattern untuk Pengenalan Jenis Daun Tanaman Obat menggunakan K-Nearest Neighbor,” Ilk. J. Ilm., vol. 12, no. 3, pp. 208–218, 2020, doi: 10.33096/ilkom.v12i3.667.208-218.

K. A. Nugraha, W. Hapsari, and N. A. Haryono, “Analisis Tekstur Pada Citra Motif Batik Untuk Klasifikasi K-NN,” Informatika, vol. 10, no. 2, pp. 135–140, 2014.

J. W. Yodha and A. W. Kurniawan, “Pengenalan Motif Batik Menggunakan Deteksi Tepi Canny Dan K-Nearest Neighbor,” Techno.COM, vol. 13, no. 4, November, pp. 251–262, 2015.

A. R. K. Haba and H. Husdi, “Sistem Cerdas dalam Mengidentifikasi Kematangan Buah Naga Berdasarkan Fitur Tekstur dengan Metode K-Nearest Neighbor,” Ilk. J. Ilm., vol. 12, no. 3, pp. 225–232, 2020, doi: 10.33096/ilkom.v12i3.665.225-232.

N. L. W. S. R. Ginantra, “Deteksi Batik Parang Menggunakan Fitur Co-Occurence Matrix Dan Geometric Moment Invariant Dengan Klasifikasi KNN,” Lontar Komput. J. Ilm. Teknol. Inf., vol. 7, no. 1, p. 40, 2016, doi: 10.24843/lkjiti.2016.v07.i01.p05.




DOI: https://doi.org/10.37905/jjeee.v4i1.12045

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Published by:
Electrical Engineering Department
Faculty of Engineering
State University of Gorontalo
Jenderal Sudirman Street No.6, Gorontalo City, Gorontalo Province, Indonesia
Telp. 0435-821175; 081340032063
Email: redaksijjeee@ung.ac.id/redaksijjeee@gmail.com

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.