Simulation of Speed Control on a PMSM Using a PI Controller

Reza Sarwo Widagdo, Balok Hariadi, Izzah Aula Wardah

Abstract


In order to manage the speed of a permanent magnet synchronous motor drive system, a practical approach for a PI controller has been developed and put into practice in this study. The adopted approach, which also preserves the proportional integral controller's straightforward structure and features, significantly enhanced the performance of the prior proportional integral controller. The final PI controller delivers quick and precise response, strong noise rejection, and minimal sensitivity to permanent magnet synchronous motor parameter fluctuations. The findings demonstrate that the suggested controller may provide best performance in terms of accuracy, parametric variation, and load torque disturbance when entering a proportional value of 0,013 and an integral value of 16,61. The proposed method has been exhaustively tested under various circumstances. The proposed solution not only possesses attributes like simplicity and ease of implementation for real-time, but also stability and effectiveness.


Keywords


PI Controller; PMSM; Speed Control

Full Text:

PDF

References


Barkas, D. A., Ioannidis, G. C., Psomopoulos, C. S., Kaminaris, S. D., & Vokas, G. A. (2020). Brushed DC motor drives for industrial and automobile applications with emphasis on control techniques: A comprehensive review. Electronics, 9(6), 887.

Frosini, L., & Pastura, M. (2020). Analysis and design of innovative magnetic wedges for high efficiency permanent magnet synchronous machines. Energies, 13(1), 255.

Y Bdewi, M., M Mohammed, A., & M Ezzaldean, M. (2021). Design and performance analysis of permanent magnet synchronous motor for electric vehicles application. Engineering and Technology Journal, 39(3), 394-406.

Widagdo, R. S., & Wardah, I. A. (2022). Design and Implementation Six-Steps Inverter Using Fuzzy Sugeno in Permanent Magnet Synchronous Machines. International Journal of Electrical, Energy and Power System Engineering, 5(3), 67-72.

Wu, J., Hu, Y., Zhang, B., Feng, G., & Liu, Z. (2022). Comparison and analysis of different rotor structures of double‐stator permanent magnet synchronous motor. IET Electric Power Applications, 16(6), 685-700.

Elsherbiny, H., Szamel, L., Ahmed, M. K., & Elwany, M. A. (2022). High Accuracy Modeling of Permanent Magnet Synchronous Motors Using Finite Element Analysis. Mathematics, 10(20), 3880.

Basnet, B., Aljehaimi, A. M., & Pillay, P. (2020). Back-EMF analysis of a variable flux machine for different magnetization states. IEEE Transactions on Industrial Electronics, 68(10), 9125-9135.

Wang, G., Zhang, G., & Xu, D. (2020). Position Sensorless Control Techniques for Permanent Magnet Synchronous Machine Drives. Singapore: Springer.

Sumega, M., Štulrajter, M., & Rafajdus, P. (2020, August). Torque Ripple Reduction in PM Synchronous Motor-FEM simulation. In 2020 International Conference on Electrical Machines (ICEM) (Vol. 1, pp. 1239-1245). IEEE.

Beser, E. K. (2021). Electrical equivalent circuit for modelling permanent magnet synchronous motors. Journal of Electrical Engineering, 72(3), 176-183.

Iturra, R. G., & Thiemann, P. (2023). Sensorless Field Oriented Control of Synchronous Machines for Low and High Speeds with Space Vector Modulation-Based Direct Flux Control Measurement Sequence. Electronics, 12(6), 1382.

Xu, Y., Lin, C., & Xing, J. (2022). Transient Response Characteristics Improvement of Permanent Magnet Synchronous Motor Based on Enhanced Linear Active Disturbance Rejection Sensorless Control. IEEE Transactions on Power Electronics.

Widagdo, R. S., Hariadi, B., & Setyadjit, K. (2023). Modelling and Analysis of Ziegler-Nichols and Chien-Hrones-Reswick Tuning PID on DC Motor Speed Control. Jurnal Teknologi Elektro, 14(1), 23-27.

Huang, M., Deng, Y., Li, H., & Wang, J. (2021). Torque ripple suppression of PMSM using fractional-order vector resonant and robust internal model control. IEEE Transactions on Transportation Electrification, 7(3), 1437-1453.

Chakraborty, M. (2013). Comparative analysis of speed control of PMSM using PI-controller and fuzzy controller. International Journal of Scientific & Engineering Research, 4(7), 103-108.

Ghanayem, H., Alathamneh, M., & Nelms, R. M. (2022, March). A comparative study of PMSM torque control using proportional-integral and proportional-resonant controllers. In SoutheastCon 2022 (pp. 453-458). IEEE.

Marufuzzaman, M., Reaz, M. B. I., Rahman, L. F., & Chang, T. G. (2014). High-speed current dq PI controller for vector controlled PMSM drive. The Scientific World Journal, 2014.

Gu, D., Yao, Y., Zhang, D. M., Cui, Y. B., & Zeng, F. Q. (2020). Matlab/simulink based modeling and simulation of fuzzy PI control for PMSM. Procedia Computer Science, 166, 195-199.




DOI: https://doi.org/10.37905/jjeee.v6i1.22287

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Published by:
Electrical Engineering Department
Faculty of Engineering
State University of Gorontalo
Jenderal Sudirman Street No.6, Gorontalo City, Gorontalo Province, Indonesia
Telp. 0435-821175; 081340032063
Email: redaksijjeee@ung.ac.id/redaksijjeee@gmail.com

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.