Designing Wemos and GPS-based Wireless Communication Gloves to Prevent Group Members from Getting Lost
Abstract
Group travel in densely populated areas presents risks of losing members, especially during peak periods such as weekends. This study aims to develop a wireless communication glove device as an aid for inter-member detection to prevent loss during travel. The method involves designing a device based on the Wemos microcontroller integrated with GPS sensors for position tracking, MAX30100 heartbeat sensor for health monitoring, an OLED I2C display as visual interface, and a buzzer as alarm. The system functions by identifying unique IDs between devices within a certain radius and triggers an alarm when connection is lost. Testing results indicate the heartbeat sensor accuracy with an average deviation of less than 3 bpm compared to manual measurements. Maximum connection distance without physical obstacles ranges from 24 to 26 meters, decreasing to 18 meters with wall obstructions. The master device detects connection loss within approximately 20 seconds, indicated by an audio alarm and display changes on the OLED screen. The estimated operational duration is 5.5 hours at 2.4 Watts power consumption. Overall, this device effectively prevents member loss with simple health monitoring and reliable connection detection features.
Keywords
Full Text:
PDFReferences
S. Kumar, P. Tiwari, and M. Zymbler, “Internet of Things is a revolutionary approach for future technology enhancement : a review,” J. Big Data, vol. 6, no. 111, pp. 4–5, 2019, doi: 10.1186/s40537-019-0268-2.
Rangga, M. Syamsudin, and Satrio, “Rancang Bangun Prototipe Sistem Pemantauan Tetes Cairan Infus menggunakan Internet of Things (IoT) dan Integrasi Perangkat,” ENTRIES J. Electr. Netw. Syst. Sources, vol. 3, no. 2, pp. 66–71, 2024, doi: 10.58466/entries.
A. Jayadi and S. Syofian, “Rancang Bangun Sistem Pengawasan Infus Berbasis Teknologi Internet Of Things ( IoT ),” TIFDA J. Technol. Inf. Darma Persada, vol. 1, no. 1, pp. 8–11, 2024.
A. Amir, U. Suwardoyo, and I. N. P. Irwan, “Sistem Pengukuran dan Pemantauan Parameter Lingkungan Tanah Pertanian berbasis Internet of Things,” Jambura J. Electr. Electron. Eng., vol. 7, no. 1, pp. 18–23, 2024.
M. P. Sari, A. Taqwa, A. S. Handayani, N. L. Husni, and S. Chodidjah, “Implementation of Fuzzy Logic Method to Get Estimation of Fluid Depletion on Smart Infusion,” IJAIDM Indones. J. Artif. Intell. Data Min., vol. 7, no. 1, pp. 28–38, 2024.
M. S. Yadnya and A. R. Larasati, “Monitoring Tetesan Cairan Infus Berbasis IoT,” J. Sains Teknol. Lingkung., vol. 11, no. 1, pp. 113–123, 2025.
N. Gouiza, H. Jebari, and K. Reklaqui, “Integration of IOT-Enabled Technologies and Artificial Intelligence in Diverse Domains: Recent Advancements and Future Trends,” J. Theor. Appl. Inf. Technol., vol. 102, no. 5, p. 1976, 2024.
Y. R. Putung, D. Noya, V. F. Aror, J. Sundah, and M. D. Patabo, “Rancang Bangun Monitoring Cairan Infus Dengan Arduino Nano Berbasis Android,” Jambura J. Electr. Electron. Eng., vol. 5, no. 1, pp. 1–6, 2023.
M. F. Hamzah, R. Suppa, and Dasril, “Sistem Monitoring Cairan Infus Berbasis Internet of Things,” JTITET J. Inform. dan Tek. Elektro Terap., vol. 13, no. 1, pp. 46–48, 2025.
F. A. Putri, A. Subki, M. M. Efendi, and L. D. Samsumar, “Monitoring Infus pada Pasien Berbasis Internet of Things (IoT) dengan Aplikasi Blynk menggunakan Metode Simplex,” JCSIT J. Comput. Sci. Inf. Technol., vol. 1, no. 4, pp. 304–315, 2024.
J. Tongkad, W. Ridwan, I. Z. Nasibu, S. Abdussamad, and S. Tansa, “Design of an IoT-Based Nursing Assistant Robot Using Nodemcu Esp8266 and Blynk,” Jambura J. Electr. Electron. Eng., vol. 6, no. 2, pp. 138–143, 2024, doi: 10.37905/jjeee.v6i2.20740.
D. Parikh, P. Kapoor, and S. Karnani, “IoT based Wearable Safety Device for Women,” IJERT Int. J. Eng. Res. Technol., vol. 9, no. 05, pp. 1086–1089, 2020.
Muthmainnah, A. Syaifudin, and N. Chamidah, “Prototipe Alat Monitoring Suhu dan Kelembapan pada Rumah Penyimpan Tembakau Berbasis Internet of Things (IoT),” J. Pendidik. MIPA, vol. 13, no. 1, pp. 177–182, 2023.
R. N. Dasmen and M. Yahya, “Implementation and Monitoring Water Drinking Necessary on Smart Dispenser with IoT-Based,” J. Tech-E, vol. 8, no. 1, pp. 14–15, 2024, doi: 10.31253/te.v8i1.2769.
I. Sucipta, J. W. Simatupang, C. Kaswandi, and I. Purnama, “Prototipe Pemantauan Tetes Cairan Infus Berbasis IoT Terkoneksi Perangkat Android,” JTE J. Teknol. Elektro, vol. 12, no. 3, pp. 113–119, 2021, doi: 10.22441/jte.2021.v12i3.003.
V. Uzayisenga and T. K. Priyambodo, “P2P Communication among Computers and Smartphones Based on Bluetooth and Wi-Fi Direct Technologies,” IJCCS Indones. J. Comput. Cybern. Syst., vol. 14, no. 1, pp. 23–34, 2020.
M. Akbar, S. Devi, and K. Diah, “Rancang Bangun Alat Pendeteksi Sampah Organik dan Anorganik Menggunakan Sensor Proximity dan NodeMCU ESP8266,” J. Komput. Terap., vol. 7, no. 2, pp. 290–299, 2021.
N. T. Somantri et al., “Rancang Bangun Prototipe Monitoring Volume Cairan Infus dan Kapasitas Oksigen Medis dengan Warning System berbasis Internet of Things,” TELKA J. Telekomun. Elektron. Komputasi dan Kontrol, vol. 11, no. 2, pp. 248–250, 2025.
J. Soldatos, S. Gusmeroli, P. Malo, and G. Di Orio, Internet of Things Applications in Future Manufacturing. 2016.
K. Zeeshan, T. Hämäläinen, and P. Neittaanmäki, “Internet of Things for Sustainable Smart Education : An Overview,” Sustainability, vol. 14, no. 7, pp. 3–6, 2022.
DOI: https://doi.org/10.37905/jjeee.v8i1.34491
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Published by:
Electrical Engineering Department
Faculty of Engineering
State University of Gorontalo
Jalan B.J.Habibie Desa Moutong Kecamatan Tilongkabila Kabupaten Bone Bolango
Telp. 0435-821175; 081340032063
Email: [email protected]/[email protected]
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.