Control and Monitoring System for a Three-Phase Induction Motor Based on Arduino Mega and VSD Integrated with LabVIEW

Fahrul Marcello Rombon, Kevind Lefinro Rompas, Natanael Hendriko Lombok, Sukandar Sawidin, Yoice R. Putung, Anthoinete P.Y. Waroh

Abstract


Three-phase induction motors are widely utilized in industrial applications due to their high efficiency and reliability. This study aims to design and implement a real-time control and operational parameter monitoring system for a three-phase induction motor. The system integrates an Arduino Mega as the main data processor, a Variable Speed Drive (VSD) for speed control, and Solid State Relays (SSR) along with contactors as actuators. Monitoring of electrical and mechanical parameters is performed using ACS712 sensors (current), ZMPT101B sensors (voltage), and Hall Effect sensors (speed/RPM), with the results displayed on a LabVIEW interface. The system evaluation and validation method was carried out by comparing sensor readings against standard measuring instruments (digital multimeter and digital tachometer) across various operating frequency variations. The test results show that the system is capable of stable operation with an average sensor measurement error (mean error) of 0.35%. The novelty of this research lies in the integration of a responsive, cost-effective, multi-parameter control and monitoring platform equipped with automatic data logging within a single integrated HMI interface, which is ready to be applied for research as well as industrial automation laboratory practices.


Keywords


Three-Phase Induction Motor; LabVIEW; Arduino Mega; Real-Time Monitoring; Variable Speed Drive (VSD).

Full Text:

PDF

References


S. TRILESTARI and I. Budiawan, “Perancangan dan Implementasi Sistem Monitoring Kecepatan dan Proteksi Motor Induksi 3 Phase Berbasis LabView: Perancangan dan Implementasi Sistem Monitoring Kecepatan dan Proteksi Motor Induksi 3 Phase Berbasis LabView,” Epsil. J. Electr. Eng. Inf. Technol., vol. 21, no. 2, pp. 81–94, 2023.

A. Aripriharta, “Kendali Motor Induksi Menggunakan Variable Speed Drive,” J. Kaji. Tek. Elektro, vol. 8, no. 1, pp. 1–6, 2023.

A. Sujatmiko and S. Supratno, “Pengendali dan Monitoring Motor 3 Phase, Berbasis Scada Wonderware 10.1 dan Touch Panel Omron Type NB10-TW1B,” in Prosiding Seminar Nasional Teknik Elektro UIN Sunan Gunung Djati Bandung, 2019, pp. 9–18.

M. Khosyi’in, A. A. Nugroho, and A. Yulistiyanto, “Three-Phase Power Data Logger Using IEM 3255 Schneider Module Based On Internet Of Things (IOT),” in Conference SENATIK STT Adisutjipto Yogyakarta, 2019, pp. 263–274.

F. Hanifah and M. Yuhendri, “Kontrol dan Monitoring Kecepatan Motor Induksi Berbasis Internet of Thing,” JTEIN J. Tek. Elektro Indones., vol. 4, no. 2, pp. 519–528, 2023.

C. D. Tran, P. Palacky, M. Kuchar, P. Brandstetter, and B. H. Dinh, “Current and speed sensor fault diagnosis method applied to induction motor drive,” IEEE Access, vol. 9, pp. 38660–38672, 2021.

S. Nor, “Integrasi LabVIEW Dengan Arduino Melalui Modbus RTU Untuk Sistem Monitoring Dan Kontrol,” Electr. J. Rekayasa dan Teknol. Elektro, vol. 18, no. 3, pp. 299–307, 2024.

M. K. Mubarok, J. Sunardi, and M. Khoiri, “RANCANG-BANGUN SISTEM MONITORING SUHU DAN GETARAN MOTOR POMPA 3 FASA MINI PLANT DCS BERBASIS LABVIEW,” in Prosiding Seminar Nasional NCIET, 2022, pp. 291–304.

W. M. Nabilah, I. Halimi, and N. Nadhiroh, “Analisa Kualitas dan Pengaturan Alarm Gangguan Daya Listrik Untuk Bengkel Kontrol Motor Industri Berbasis LabVIEW,” in Seminar Nasional Teknik Elektro, 2021, pp. 167–173.

M.-Q. Tran, M. Elsisi, K. Mahmoud, M.-K. Liu, M. Lehtonen, and M. M. F. Darwish, “Experimental setup for online fault diagnosis of induction machines via promising IoT and machine learning: Towards industry 4.0 empowerment,” IEEE access, vol. 9, pp. 115429–115441, 2021.

A. Muchtar, D. A. L. Sari, H. Ashari, M. I. Burhan, A. Fitriati, and N. A. Iriawan, “Development of a Power Quality Monitoring System for Three-Phase Induction Motors Using LabView,” J. Media Elektr., vol. 22, no. 3, pp. 271–278, 2025.

N. F. Fasha, S. Utami, and M. R. B. Pratama, “Monitoring Sistem Kelistrikan Tiga Fasa Berbasis IoT dengan Sensor ACS712 dan ZMPT101B,” J. Tek. ENERGI Учредители Politek. Negeri Bandung, vol. 13, no. 1, pp. 24–29, 2024.

Y. Badruzzaman and R. A. Razaqi, “Monitoring of three-phase distribution power transformer based on the Internet of Things (IoT) and SCADA,” J. Infotel, vol. 15, no. 2, pp. 209–217, 2023.

R. G. Gadia and R. V Marcos, “A Cost-Effective LabVIEW-Arduino Framework for Control System Computation and PID Simulation in Engineering Education,” Int. J. Inf. Educ. Technol., vol. 15, no. 8, 2025.

A. Fereidooni, S. A. Davari, C. Garcia, and J. Rodriguez, “Simplified predictive stator current phase angle control of induction motor with a reference manipulation technique,” IEEE Access, vol. 9, pp. 54173–54183, 2021.

M. Numan et al., “Modeling and control of an induction motor with built-in force actuator for vibration suppression,” IEEE Access, 2025.

J. K. Atal, S. S. Rana, R. N. Dash, A. Sen, and S. S. Mishra, “Robust Fault Classification of Three Phase Induction Motor Using GWO-SVM With Simulation and Hardware Validation,” IEEE Access, vol. 13, pp. 203519–203535, 2025.

A. A. Muntashir, E. Purwanto, B. Sumantri, H. H. FAkhruddin, and R. A. N. Apriyanto, “Static and dynamic performance of vector control on induction motor with PID controller: an investigation on labVIEW,” Automot. Exp., vol. 4, no. 2, pp. 83–96, 2021.

M. N. Almani, G. A. Hussain, and A. A. Zaher, “An improved technique for energy-efficient starting and operating control of single phase induction motors,” IEEE Access, vol. 9, pp. 12446–12462, 2021.

B. Asad et al., “The modeling and investigation of slot skews and supply imbalance on the development of principal slotting harmonics in squirrel cage induction machines,” IEEE Access, vol. 9, pp. 165932–165946, 2021.

R. Hussain, M. A. Saleh, and S. S. Refaat, “Various Faults Classification of Industrial Application of Induction Motors Using Supervised Machine Learning: A Comprehensive Review,” IEEE Access, 2025.

A. C. S. Araújo, L. M. Rabelo, P. C. M. Lamim Filho, and W. M. Caminhas, “A Digital Twin Approach to Smart Monitoring and Fault Diagnosis,” IEEE Access, 2025.

S. Bazi, R. Benzid, Y. Bazi, M. S. Nait-Said, and M. M. Al Rahhal, “Detection of Induction Motor Incipient Short Circuit Faults Based on Continuous Wavelet Transform with Higher-Order Statistics,” IEEE Access, 2025.

M. Ahsan, J. Rodriguez, and M. Abdelrahem, “Bearing fault diagnosis in induction motors using low-cost triaxial ADXL355 accelerometer and a hybrid CWT-DCNN-LSTM model,” IEEE Access, 2025.

J. Choi and S. Im, “Multivariate kernel density estimation performance in detecting abnormalities in three-phase induction motors with a focus on optimizing kernel and bandwidth,” IEEE Access, vol. 12, pp. 138594–138609, 2024.




DOI: https://doi.org/10.37905/jjeee.v8i2.39876

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Published by:
Electrical Engineering Department
Faculty of Engineering
State University of Gorontalo
Jalan B.J.Habibie Desa Moutong Kecamatan Tilongkabila Kabupaten Bone Bolango
Telp. 0435-821175; 081340032063
Email: [email protected]/[email protected]

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.