Tempat Sampah Pintar Berbasis Internet of Things (IoT) Dengan Sistem Teknologi Informasi

Mualief Ismail, Riska K. Abdullah, Syahrir Abdussamad

Abstract


Mengangkat dari permasalahan sampah yang berserakan di sekitar area tong sampah, permasalahan tersebut kini dapat di tangani dengan sebuah penelitian tentang tempat sampah pintar. Metode yang digunakan adalah eksperimen dan perancangan dimana pengujian dilakukan terhadap jarak sensor, ketinggian sampah dan respon data terhadap web server. Tempat sampah ini menggunakan teknologi raspberry pi dan internet of things (IoT) yang bersifat berbasis website.  Sistem akan dibuat dari rangkaian pendukung yaitu, sensor HC-SR04 sebagai pendeteksi objek dan data sampah. Sementara itu, pada output di gunakan motor servo sebagai penggerak penutup tong sampah, selain itu terdapat Web server sebagai pengecekan data sampah dari jarak jauh. Pada bagian selanjutnya terdapat pula output berupa LED sebagai pemberi tahu keadaan tong sampah ketika penuh atau kosong secara langsung. Hal ini dapat membantu tingkat kesadaran masyarakat dalam hal membuang sampah tidak pada tempatnya. Hasil yang diperoleh dalam penelitian ini adalah buka tutup tong sampah dengan setingan perangkat lunak      lebih kecil dari 60 cm terbuka dan lebih besar dari 60 cm tidak terbuka. Selanjutnya hasil pendeteksia sensor terhadap level sampah 8 cm level penuh, 21-28 cm level setengah dan 48 cm level kosong. Dan hasil pengiriman data ke web server semua level sampah terdeteksi sudah sesuai.

Taking the problem of garbage scattered around the trash can area, this problem can now be handled with a study on smart trash cans. The method used is experimental and design where testing is carried out on sensor distance, waste height and data response to the web server. This trash can uses raspberry pi technology and internet of things (IoT) which is website-based. The system will be made from a series of supports, namely the HC-SR04 sensor as object detection and garbage data. Meanwhile, at the output, a servo motor is used to drive the trash can cover, besides that there is a Web server for checking waste data remotely. In the next section there is also an output in the form of an LED as a direct notification of the state of the trash can when it is full or empty. This can help the level of public awareness in terms of disposing of waste inappropriately. The results obtained in this study are open and close trash cans with software settings smaller than 60 cm open and larger than 60 cm not open. Furthermore, the sensor detection results for the waste level of 8 cm full level, 21-28 cm half level and 48 cm empty level. And the results of sending data to the web server, all levels of waste detected are appropriate.


Keywords


Raspberry Pi, sensor, Internet of things (IoT), Web server, servo motor.

Full Text:

PDF

References


M. R. Pakaya, O. Musa, J. Karim, and S. Abdussamad, “SIG Lokasi UMKM Berbasis Android,” Jambura J. Electr. Electron. Eng., vol. 2, no. 2, pp. 52–59, Jul. 2020.

Z. Purnomo, J. Karim, B. Senung, and S. Abdussamad, “Sistem Informasi Jasa Pemesanan Percetakan Berbasis Android,” Jambura J. Electr. Electron. Eng., vol. 2, no. 2, pp. 44–51, Jul. 2020.

A. W. A. Antu, S. Abdussamad, and I. Z. Nasibu, “Rancang Bangun Running Text pada Dot Matrix 16X160 Berbasis Arduino Uno Dengan Update Data System Menggunakan Perangkat Android Via Bluetooth,” Jambura J. Electr. Electron. Eng., vol. 2, no. 1, pp. 8–13, Jan. 2020.

Faisal, “aplikasi smart trash can dalam mengatasi persoalan sampah secara mobile berbasis android. instek, 2.,” INSTEK, vol. 2, 2017.

A. Wuryanto, N. Hidayatun, M. Rosmiat, and Y. Maysaroh, “Perancangan Sistem Tempat Sampah Pintar Dengan Sensor HCRSF04 Berbasis Arduino UNO R3,” Paradig. - J. Komput. dan Inform., vol. XXI, no. 1, pp. 1–8, 2019.

A. A.Md., A. Nugroho, S.T., MT., and U. Ali Ahmad, S.T., M.T., “Perancangan dan Implementasi Sistem Monitoring Untuk Pelaporan Sampah Berabasis Teknologi Embedded,” J. e-Proceeding Eng., vol. 3, no. 1, pp. 666–673, 2016.

Sukarjadi, D. T. Setiawan, Arifiyanto, and M. Hatta, “Perancangan Dan Pembuatan Smart Trash Bin Berbasis Arduino Uno Di Universitas Maarif Hasyim Latif,” Tek. Eng. Sains J., vol. 1, no. 2, pp. 101–110, 2017.

S. Abdussamad, “Rancang Bangun Inverter Mini 1.5 Vdc to 220 Vac Untuk Lampu Darurat,” J. Tek., vol. 18, no. 1, pp. 7–16, Jun. 2020.

M. R. Wirajaya, S. Abdussamad, and I. Z. Nasibu, “Rancang Bangun Mesin Penetas Telur Otomatis Menggunakan Mikrokontroler Arduino Uno,” Jambura J. Electr. Electron. Eng., vol. 2, no. 1, pp. 24–29, Feb. 2020.

W. Ridwan, I. Z. Nasibu, R. D. R. Dako, and I. Wiranto, “Sistem Pemantauan Dan Pengendalian Penerangan Rumah Berbasis Web Menggunakan Raspberry Pi,” Semin. Nas. Tek. Elektro, vol. 1, no. 1, p. 225, 2017.

S. Adriansyah Hulukati, T. Pratiwi Handayani, R. Jaya, and S. Abdussamad, “A prototype of solar-powered automatic ablution tap,” IOP Conf. Ser. Mater. Sci. Eng., vol. 486, no. 1, 2019.




DOI: https://doi.org/10.37905/jjeee.v3i1.8099

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Published by:
Electrical Engineering Department
Faculty of Engineering
State University of Gorontalo
Jenderal Sudirman Street No.6, Gorontalo City, Gorontalo Province, Indonesia
Telp. 0435-821175; 081340032063
Email: redaksijjeee@ung.ac.id/redaksijjeee@gmail.com

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.