RANCANG BANGUN ALAT PENGUKUR SUHU DAN HAND SANITIEZER

Nursifaun Nikmah, Imam Sucahyo, Meta Yantidewi

Abstract


This study aims to make a temperature measuring device and an automatic hand sanitizer using the MLX90614 sensor, which functions as a body temperature detector, Arduino Uno as a microcontroller which is then displayed on a 16x2 LCD and is equipped with a buzzer as an alarm sign if the temperature exceeds normal limits. The results obtained from measuring body temperature on the back of the hand produce an average value of 36.20 with an average tool error of 0.21% and an instrument accuracy of 99.79%. While the measurement of body temperature on the forehead obtained an average of 36.36 and an average error of 0.47%. Thus, Therefore, the tool is 99.53% accurate. Sensor sensitivity is affected by distance. The further away the sensor is from the object, the sensitivity of the sensor will decrease.

Keywords


Body temperature, hand sanitizer, MLX90614

References


Goda Vasantharao., S. A. (2020). Temperature Detection and Automatic Sanitization and Disinfection Tunnel-COVID 19.

Hanur, M. F. A. (2016). Rancang Bangun Alat Pemutus KWH Meter Sebagai Proteksi Berbasis Arduino. 54.

Listianto, R. D., Sunardi, S., & Puriyanto, R. D. (2019). Monitoring Tegangan Baterai Lithium Polymer pada Robot Sepak Bola Beroda secara Nirkabel. Buletin Ilmiah Sarjana Teknik Elektro, 1(1), 1. https://doi.org/10.12928/biste.v1i1.826

Nurhania. (2019). Perbandingan Kesegaran Sayuran Dari Berbagai Bahan Kemasan Dilihat Dari Suhu Dan Kelembaban. Makasar:UNIVERSITAS ISLAM NEGERI ALAUDDIN, 7(2), 1520–1529.

Nurhasanah, Harijanto, A., Maryani, & Program. (2018). Alat Peraga Karakteristik Transistor Menggunakan Papan Arduino dan Laptop Sebagai Media Pembelajaran Elektronika Dasar. Seminar Nasional Pendidikan Fisika 2018, 3, 158–161.

Perdana, Wisnu, A. (2019). Alat Pemantau Kondisi Seorang Gamer. 5–15. https://elibrary.unikom.ac.id/id/eprint/1166/8/10 UNIKOM_Wisnu_Adi_Perdana_BAB II.pdf

Puspasari, F.-, Fahrurrozi, I.-, Satya, T. P., Setyawan, G.-, Al Fauzan, M. R., & Admoko, E. M. D. (2019). Sensor Ultrasonik HCSR04 Berbasis Arduino Due Untuk Sistem Monitoring Ketinggian. Jurnal Fisika Dan Aplikasinya, 15(2), 36. https://doi.org/10.12962/j24604682.v15i2.4393

Rahayuningtyas, A., Susanti, N. D., Pramono, E. K., Siregar, Y. H., Sitorus, A., Sagita, D., Penelitian, P., Tepat, T., Ilmu, L., Indonesia, P., & Barat, J. (2020). Design and Implementation of Automatic Hand Sanitizer and. 320–330.

Ramadhani, L. R. (2017). Rancang Bangun Alat Pegukur Detak Jantung dan Panas Tubuh Dengan Komunikasi WIFI(2,4GHz) Menggunakan Android. Repository UNEJ.

S. Angelina et al. (2020). “Infection Prevention in Practice Assessing the Hawthorne effect on hand hygiene compliance in an intensive care unit,. 2.

Sari, W., Rasyid, R., Fisika Elektronika, L., Instrumentasi, D., & Fisika, J. (2021). Rancang Bangun Sistem Termometer Inframerah dan Hand Sanitizer Otomatis untuk Memutus Rantai Penyebaran Covid-19. Jurnal Fisika Unand (JFU), 10(1), 76–82. http://jfu.fmipa.unand.ac.id/76

Urbach, T. U., & Wildian, W. (2019). Rancang Bangun Sistem Monitoring dan Kontrol Temperatur Pemanasan Zat Cair Menggunakan Sensor Inframerah MLX90614. Jurnal Fisika Unand, 8(3), 273–280. https://doi.org/10.25077/jfu.8.3.273-280.2019

Yan-R G, Qing-D C, et al. (2020). The Origin, Transmission, and Clinical Therapies on Coronavirus Disease 2019 (Covid-19) Outbreak.

Yayan Hendrian, R. A. A. R. (2021). Perancangan Alat Ukur Suhu Tubuh dan Hand Sanitizer Otomatis Berbasis IOT. Infortech, 3.

Yurianto Ahmad, Bambang Wibowo, K. P. (2020). Pedoman Pencegahan Dan Pengendalian Coronavirus Disease (Covid-19).




DOI: https://doi.org/10.34312/jpj.v4i1.13893

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2022 Nursifaun Nikmah

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

slot gacor slot gacor hari ini slot gacor 2025 demo slot pg slot gacor slot gacor