Analisis Geologi Teknik Desa Isimu Raya, Kecamatan Tibawa, Kabupaten Gorontalo, Provinsi Gorontalo

Aliim Risky Pahrun, Ahmad Zainuri, Muh. Kasim

Abstract


This research was conducted in Isimu Raya Village to assess the geotechnical conditions of the study area using quantitative field mapping methods and data analysis. The analysis encompassed the characterization of the physical and mechanical properties of soils, as well as rock analysis. The mapping results indicate that the study area comprises packstone limestone, elastic silt soil units, and low-plasticity sandy clay. Based on laboratory testing of soil physical properties, the elastic silt exhibited a liquid limit of 47.86% and plasticity index values of 48.89% and 54.08%. In contrast, the low-plasticity sandy clay showed a liquid limit of 48.61%, a plastic limit of 15.48%, and a plasticity index of 33.13%.


Keywords


Geotechnics; Oil Physical Properties; Mapping; Analysis

Full Text:

PDF

References


Aldefae, A. H., Mohammed, J., & Saleem, H. D. (2020). Digital maps of mechanical geotechnical parameters using GIS. Cogent Engineering, 7(1), 1779563.

Axelsson, K., & Mattsson, H. (2016). Geoteknik. Studentlitteratur AB.

Bachri, S. (2006). Stratigrafi lajur volkano-plutonik daerah gorontalo, sulawesi. Jurnal Geologi Dan Sumberdaya Mineral, 16(2), 94-106.

Bachri, S., Sukido., Ratman, N., (1994). Geology of the Tilamuta Sheet, Sulawesi. Pusat Penelitian dan Pengembangan geologi, Bandung.

BNPB. 2021. Kajian Risiko Bencana Nasional provinsi Gorontalo 2022-2026. Direktorat Pemetaan dan Evaluasi Risiko Bencana, Provinsi Gorontalo. 101 hal.

Brahmantyo, B. (2006). Bandono,“Klasifikasi Bentuk Muka Bumi untuk Pemetaan Geomorfologi pada Skala 1: 25.000 dan Aplikasinya untuk Penataan Ruang,”Geoaplika

Dunham, R. J. (1962). Classification of carbonate rocks according to depositional texture.

Hardiyatmo, Hary C. (2017). Mekanika Tanah I edisi ketujuh , UGM Press. Yogyakarta.

Khan, F., Das, B., Mishra, S. R. K., & Awasthy, M. (2022). A review on the feasibility and application of geospatial techniques in geotechnical engineering field. Materials Today: Proceedings, 49, 311-319.

Kristanto, W. A. D., Agustiyar, F., Damayanti, A., & Sari, V. C. E. (2021). Karakteristik Geologi Teknik Desa Katekan, Kecamatan Gantiwarno, Kabupaten Klaten, Provinsi Jawa Tengah. KURVATEK, 6(2), 183-192.

Permana, A. P., Kasim, M., & Mamonto, F. K. (2021). Analisis Lingkungan Purba Batugamping Daerah Limboto Barat Kabupaten Gorontalo. Jurnal Geosapta, 7(2), 97-102.

Priadi, E. (2019). Pemetaan Zonasi Geoteknik Di Kota Pontianak berdasarkan Data Konsistensi Dan Sifat-sifat Tanah Dengan Sistem Informasi Geografis. Jurnal Teknik Sipil, 16(2), 288-303.

Standar Nasional Indonesia SNI 6371:2015 tentang Tata Cara Pengklasifikasian Tanah untuk Keperluan Teknik dengan Sistem Klasifikasi Unifikasi Tanah (ASTM D 2487-06, MOD).

Zaika, Y., & Munawir, A. A. (2019). Mekanika Tanah Dasar. Universitas Brawijaya Press.

Zakaria, Z., & Jihadi, L. H. (2016). Peran Ilmu Dasar dalam Geoteknik untuk Menunjang Pembangunan Berkelanjutan yang Berwawasan Lingkungan. Bull. Sci. Contrib., 14, 239.




DOI: https://doi.org/10.37905/jrpi.v2i4.35157

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 aliim risky pahrun, ahmad zainuri, muh. kasim

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.