Jenis–Jenis Kayu dan Perhitungan Volume Bahan Pembuatan Kapal Nelayan di Kecamatan Batuda Pantai Kabupaten Gorontalo

Rini Thalib, Aziz Salam, Citra Panigoro

Abstract


This study aims to determine the types of wood used for making fishing boats and how to calculate the volume of wood needed for their manufacture in Olimoo'o Village and Kayubulan Village, Batudaa Pantai District, Gorontalo Regency. This study was conducted from March to September 2024 using a survey method. This study included measuring 50 boat samples, each sample divided into 25 boat samples in Kayubulan Village and 25 samples in Olimoo'o Village. The results showed that the types of wood used by boat craftsmen in making boats in Batudaa Pantai District, especially in the research location, namely Olimoo'o Village and Kayubulan Village, mostly used Nantu wood, namely from 50 sample boats, 17 boats used Nantu wood. Using Tindilo wood (5 boats), Wulu wood (7 boats), Wabo'o wood (6 boats), Binggile wood (5 boats), Talanggilala wood (5 boats), and Teak wood (5 boats). These seven types of wood are highly sought after by fishermen due to their high quality for boat construction. To estimate the wood requirements for boat construction, the plank volume and the length and diameter of the mahera were calculated using the plank volume coefficient (Cp), the mahera length coefficient (Cpm), and the mahera diameter coefficient (Cdm). The calculation results were Cp = 0.0525, Cpm = 0.9231, and Cdm = 0.7447.

Keywords


Fishing boats, wood materials, Olimoo'o, Kayubulan.

References


Dhaifullah, I. R., Salsabila, A. A., & Yaqin, M. A. (2022). Survei Teknik Pengujian Software. Journal Automation Computer Information System, 2(1), 31-38.

Harianto, K., Sinawati, S., & Fitria, F. (2022). Rancang Bangun Perahu Ketinting Listrik Tenaga Matahari Provinsi Kalimantan Utara. Sebatik, 26(2), 807-813.

Kinho, J., & Irawan, A. (2011). Studi keragaman jenis cempaka berdasarkan karakteristik morfologi di Sulawesi Utara. Prosiding Ekspose Hasil-hasil Penelitian BPK Menado, 61-78.

Nani, A., Salam, A., & Baruadi, A. S. (2023). Jenis-Jenis Kayu dan Perhitungan Volume Bahan Pembuatan Kapal Nelayan Tradisional di Kabupaten Bolaang Mongondow Utara. The NIKe Journal, 11(5), 193-205.

Seftianingsih, D. K. (2018). Pengenalan Berbagai Jenis Kayu Solid Dan Konstruksinya Untuk Furniture Kayu. Jurnal Kemadha, 8(1).

Sulistyowati, R. T. (2011). Jenis-Jenis Tumbuhan Yang Dimanfaatkan Untuk Pembuatan Perahu Tradisional Oleh Nelayan Puger Kabupaten Jember. [Skripsi]. Jurusan Biologi Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember.

Wilujeng, S & Simbiak, M. (2015). Karakterisasi Morfologi Xanthostemon novoguineensis Valeton (Myrtaceae) Dari Papua. Prosiding Seminar Nasional Masyarakat Biodiversitas Indonesia,1(3). 466-471. ISSN 2407-8050. DOI: 10.13057/psnmbi/m010315

Wolok E, & Lahay, M. I. (2016) Fakultas Perikanan dan Ilmu Kelautan Universitas Negeri Gorontalo. https://repository.ung.ac.id/karyailmiah/show/1025/ karakteristik desain perahu perikanan katinting diprovinsi gorontalo.html

Yutaro, M. F. (2020). Analisis Perbandingan Biaya Pengadaan Kapal Jenis Kayu dan Fiberglass di Pelabuhan Perikanan Samudera Cilacap. Institut Pertanian Bogor. Bogor




DOI: https://doi.org/10.37905/nj.v13i2.33824

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 The NIKé Journal

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

NIKé Jurnal Ilmiah Perikanan dan Kelautan (e-ISSN: 2722-5836) by Faculty of Marine and Fisheries Technology Universitas Negeri Gorontalo is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. Powered by Public Knowledge Project OJS. 

Editorial Office

Faculty of Marine and Fisheries Technology , Universitas Negeri Gorontalo
Jl. Jend. Sudirman, Dulalowo Timur, Kota Tengah, Kota Gorontalo, Gorontalo, Indonesia
Email: [email protected].