Analisis Defect Rajungan (Portunus pelagicus) Kaleng Menggunakan Metode Failure Mode And Effect Analysis (FMEA) Di PT. XYZ

Nirmala Efri Hasibuan, Basri Basri, Putri Wening Ratrinia, Muh Suryono, Aulia Azka, Eko Novi Saputra, Meta Meutia

Abstract


PT XYZ  is an industry that operates in the fisheries sector with superior products, pasteurized crab meat in cans. Increasing market demand, including demand for canned crab exports, requires companies to produce products quickly and correctly. However, in the production of canned crab, defective products are often found or do not meet quality standards. The aim of this research is to identify defect problems in canned crab products and provide suggestions for improvements to overcome the problem in order to minimize the occurrence of defects that are detrimental to the company. Research data collection methods are through observation, interviews and questionary. The Failure Mode and Effect Analysis (FMEA) method is used to identify and analyze defects that occur. FMEA is used to determine the severity level, occurrence level and detection level, so that a Risk Priority Number (RPN) value can be obtained which can determine the priority of defects that must be prioritized for repair. The identification results at PT XYZ found 7 types of defects. The highest RPN defect value that occurs is a rust defect with an RPN value of 324. The defects that occur in this problem are caused by 4 factors, namely humans, methods, materials and the environment. Proposed improvements to reduce the chance of defects occurring in cans include material inspection, human/operator error evaluation, maintaining process environmental conditions, and optimizing the implementation of standard operating procedures (SOP)


Full Text:

PDF

References


Addien, A., & Laksono, P. W. (2017). Analisis Pengendalian Kualitas Coca-Cola Kaleng Menggunakan Statistical Process Control pada PT CCAI Central Java. Seminar dan Konferensi Nasional IDEC.

Amin, Q., Dwilaksana, D., & Ilminnafik, N. (2019). Analisis Pengendalian Kualitas Cacat Produk Kaleng 307 di PT.X Menggunakan Metode Six Sigma. Jurnal Energi Dan Manufaktur, 12(2), 52. https://doi.org/10.24843/JEM.2019.v12.i02.p01

Antonius, A., Bobby, W., & Intan, J. (2020). Failure Mode Effect Analysis. CRMS Indonesia.

Boldizsár, A., Török, E., & Pásztor, A. (2023). Supplier Qualification Using FMEA in a Meat Company. Periodica Polytechnica Transportation Engineering, 51(4), 323–328. https://doi.org/10.3311/PPtr.22548

Erwanto, D., Rahayu, P. N., & Utomo, Y. B. (2021). Klasifikasi Cacat Pada Kaleng Kemasan Menggunakan Metode Lacunarity Dan Naïve Bayes. Jurnal Elektro Luceat, 7(2).

Febyana, A. T. (2020). Quality Control Pada Proses Produksi Crab Meat Kaleng Yang Diolah Dengan Semi Machine Terhadap Foreign Material Di PT. Phillips Seafood Indonesia Lampung Plant. Universitas Airlangga. Surabaya.

Hidayat, K., Tsana, N. U. B., & Maflahah, I. (2022). Quality control of crab meat pasteurization using six sigma. IOP Conference Series: Earth and Environmental Science, 1059(1), 012071. https://doi.org/10.1088/1755-1315/1059/1/012071

Irawati, S. A. I., & Vinaya, A. A. (2021). Analisa Pengendalian Kualitas Cacat Kaleng Rajungan Menggunakan Metode Statistical Proses Control (SPC) (Studi Kasus: PT. Graha Makmur Cipta Pratama). Universitas Internasional Semen Indonesia, Skripsi.

Kartikasari, V., & Romadhon, H. (2019). Analisa Pengendalian dan Perbaikan Kualitas Proses Pengalengan Ikan Tuna Menggunakan Metode Failure Mode And Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) Studi kasus di PT XXX Jawa Timur. Journal of Industrial, 1(1), 1–10. https://doi.org/10.26905/jiv.v1i1.2999

Samad, A., Natsir, A. D. S. R., & Kadir, D. M. (2022). Identifikasi Kemasan Cacat Produk Rajungan Dengan Metode Six Sigma Pada PT. Kencana Bintang Terang Makassar. Journal of Agro-industry Engineering Research (JAIER), 2(1).

Santuso, A., & Hermanuadi, D. (2023). Perbaikan Kualitas Pengalengan Ikan Dengan Metode FMEA di PT. Sumber Mutiara Samudra Banyuwangi. Journal of Food Engineering, 2(2).

Saroyo, G. (2010). Proses Produksi Mackerel/Sardines di PT. Maya Food Industries Pekalongan. Universitas Sebelas Maret. Surakarta.

Surya, D. A. A., Zuraida, I., Pamungkas, B. F., Irawan, I., & Kusumaningrum, I. (2024). Penerapan Sistem Good Manufacturing Practices (Gmp) Pada Proses Pembekuan Ikan Layur Di Cv. Sinar Harapan Berau. Jambura Fish Processing Journal, 6(1). https://doi.org/10.37905/jfpj.v6i1.18082

Wicaksono, A., & Yuamita, F. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ. Jurnal Teknologi dan Manajemen Industri Terapan, 1(3), 145–154. https://doi.org/10.55826/tmit.v1iIII.44

Yoseph, Kosasih, W., & Doaly, C. O. (2023). Peningkatan Produktivitas Dan Kualitas Pada Lini Produksi Drum Menggunakan Pendekatan Lean Six Sigma. Jurnal Mitra Teknik Industri, 2(1), 90–101. https://doi.org/10.24912/jmti.v2i1.25531

Zuraida, R., Rantautama, B., Sutrisnohadi, N., & Pratomo, C. D. A. (2012). Pengendalian Kualitas untuk Meminimalkan Jumlah Cacat pada Produk Kaleng Aeorosol. ComTech: Computer, Mathematics and Engineering Applications, 3(1), 584. https://doi.org/10.21512/comtech.v3i1.2457




DOI: https://doi.org/10.37905/jfpj.v6i1.23800

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Nirmala Efri Hasibuan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.