ANALISIS KESIAPAN LITERASI TEKNOLOGI BATTERY MANAGEMENT SYSTEM (BMS) KENDARAAN LISTRIK PADA MAHASISWA PENDIDIKAN TEKNIK MESIN

Hafid Rahmandan, Andi Maga Umara, Muhammad Yasser Arafat, Mohamad Riyandi Badu

Abstract


The national energy transition demands vocational teacher candidates who are technologically literate in electric vehicle systems, including Battery Management Systems (BMS). This study aims to map the technology literacy level and pedagogical readiness of Mechanical Engineering Education students at Universitas Negeri Gorontalo regarding electric vehicle BMS technology. An exploratory descriptive quantitative design was employed with purposive sampling on sixth and eighth semester students who had completed the Automotive Electrical Systems course. Data were collected using two instruments: a BMS Cognitive Literacy Test (20 multiple choice items covering BMS functions, battery protection systems, and cell balancing) and a Pedagogical Readiness Scale measuring students' self-efficacy in teaching BMS technology at vocational high schools. Instruments were validated through expert judgment, and data were analyzed using descriptive statistics with percentage interval categories. Results show a mean cognitive test achievement of 61.5% (Fair category), with thermal management and State of Health (SoH) algorithm items recording the highest difficulty levels. The mean Pedagogical Readiness Scale reached 3.42 out of 5.00 (Fairly Ready category). A significant gap was found between students' limited technical understanding and their high pedagogical motivation and awareness. These findings imply the need to structurally integrate electric vehicle BMS content into the Automotive Electrical Systems curriculum to produce competent vocational teacher candidates relevant to the demands of the renewable energy based automotive industry.

Full Text:

PDF

References


Arikunto, S. (2020). Prosedur Penelitian: Suatu Pendekatan Praktik (Edisi Revisi ke-2). Rineka Cipta.

Creswell, J. W., & Creswell, J. D. (2023). Research Design: Qualitative, Quantitative, and Mixed Methods Approaches (6th ed.). Sage Publications.

Gabbar, H. A., Othman, A. M., & Abdussami, M. R. (2021). Review of Battery Management Systems (BMS) Development and Industrial Standards. Technologies, 9(2). https://doi.org/10.3390/technologies9020028

Hardiyanta, R. A. P., Hermanto, H., Kurniawan, A., Purnawan, P., & Prakoso, I. E. (2024). Development of The Automotive Technology Vocational Education Curriculum Based on Current Needs of The Automotive Industry. Jurnal Pendidikan Vokasi Otomotif, 6(2), 39–48. https://doi.org/10.21831/jpvo.v6i2.73156

Intang, S. B. (2023). Validitas dan Reliabilitas Instrumen Penelitian Pendidikan. In Universitas Negeri Makassar Press. Universitas Negeri Makassar Press.

Kemendikbudristek. (2023). Keputusan Kepala BSKAP Nomor 033/H/KR/2023 tentang Capaian Pembelajaran pada Kurikulum Merdeka. In Kementerian Pendidikan, Kebudayaan, Riset, dan Teknologi. Kementerian Pendidikan, Kebudayaan, Riset, dan Teknologi.

Kementerian Keuangan RI. (2026). Laporan Nota Keuangan dan APBN 2026: Strategi Subsidi Energi di Tengah Fluktuasi Harga Minyak Dunia. Kemenkeu Press.

Nuarta, I. N., & Sukedi, M. (2024). Kebijakan Hukum Pengaturan Penggunaan Kendaraan Listrik Dalam Penguatan Ketahanan Energi Nasional. Jurnal Preferensi Hukum, 5(2), 145–154. https://doi.org/10.22225/jph.5.2.10413.145-154

Nugroho, A. D., Alim, M. S., Sundari, S., & Soekarno, G. R. (2023). Kebijakan Dekarbonisasi Sistem Energi Indonesia pada Sektor Energi Terbarukan. Cakrawala, 17(2), 109–125. https://doi.org/10.32781/cakrawala.v17i2.539

Sugiyono. (2021). Metode Penelitian Kuantitatif, Kualitatif, dan R&D (Edisi ke-3). Alfabeta.

Sunardi, Syarifudin, R., & Machmoed, B. R. (2023). Pengaruh Minat dan Persepsi Profesi Guru Terhadap Kesiapan Menjadi Guru Produktif Mahasiswa Program Studi Kependidikan Pendahuluan Pendidikan merupakan sarana untuk meningkatkan kualitas Sumber Daya Manusia sehingga dapat tercapainya negara yang terus ber. JAMBURA (Journal of Engineering Education), 2(1), 22–29

Suyetno, A., & Yoto. (2021). Learning media development based on CNC simulator as the digital tool to support the CNC practice learning during COVID-19 new normal. Journal of Physics: Conference Series, 1833(1). https://doi.org/10.1088/1742-6596/1833/1/012009

Thangavel, S., Mohanraj, D., Girijaprasanna, T., Raju, S., Dhanamjayulu, C., & Muyeen, S. M. (2023). A Comprehensive Review on Electric Vehicle: Battery Management System, Charging Station, Traction Motors. IEEE Access, 11(January), 20994–21019. https://doi.org/10.1109/ACCESS.2023.3250221

Tian, J., Xiong, R., Shen, W., Lu, J., & Yang, X. G. (2021). Deep neural network battery charging curve prediction using 30 points collected in 10 min. Joule, 5(6), 1521–1534. https://doi.org/10.1016/j.joule.2021.05.012

Williams, M. K., Christensen, R., Mcelroy, D., & Rutledge, D. (2023). Teacher self-efficacy in technology integration as a critical component in designing technology-infused teacher preparation programs. Contemporary Issues in Technology and Teacher Education, 23(1), 228–259.

Yoto, Marsono, Suyetno, A., Mawangi, P. A. N., Romadin, A., & Paryono. (2024). The role of industry to unlock the potential of the Merdeka curriculum for vocational school. Cogent Education, 11(1). https://doi.org/10.1080/2331186X.2024.2335820

Yusuf, A. M. (2022). Metode Penelitian: Kuantitatif, Kualitatif, dan Penelitian Gabungan. Prenada Media.

Zhao, Y., Wang, Z., Yan, L., Sun, Z., Liu, P., Zhang, L., & Li, W. (2025). Bridging battery degradation and safety: Challenges and opportunities. ETransportation, 26(September), 100497. https://doi.org/10.1016/j.etran.2025.100497




DOI: https://doi.org/10.37905/jjee.v5i1.40006

Refbacks

  • There are currently no refbacks.


Copyright (c) 2026 Hafid Rahmandan, Andi Maga Umara, Sugeng Pramudibyo, Monica Pratiwi, Muhammad Yasser Arafat

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.